The meter of foam costs money.
The air between parts, too.
Upload the parts. The engine nests them with the minimum spacing your blade can take, roll mode if you cut from the roll, and gets the cost per m² before cutting. PDF with your logo, if you need it.
No card. No demo. No training.
How you do it today
- ·You place parts on the table by eye
- ·You leave margin "just in case"
- ·You count the roll when it runs out
- ·Quote to the customer the next day
How you'd do it with NestBlade
- The engine packs to 1 mm spacing
- Roll mode with unlimited length
- Tells you the linear meters before cutting
- Signed PDF in five minutes
Quote and cut. Without wasting the roll.
Material cheap by m², expensive by volume. The less air between parts, the more meters for the next job.
NestBlade. One price.
- Multi-sheet nesting and DXF ready for your CNC
- Real cost: material + USD/h machine time
- PDF with your logo and approval by link
- Approved work goes to the shop. Same data.
First 10 shops: 59 USD/mo × 6 months. Code FOUNDERS.
How it works
Two minutes. The time it takes to make a coffee.
Upload the DXF
Drop the customer's drawing. Parts, holes and quantities are read for you.
See the cost
Sheets, material and machine-hour. The number you'll sign, not the one in your head.
Send the PDF
With your logo. The customer approves from a link. No account.
The shop cuts that
Same nesting. DXF into your CAM. No rebuilding the job in Lantek.
Try 14 days with a DXF sitting on your desk.
No paperwork. No "let us review your case." One email and done.
Here's what changes Monday morning
Unlimited roll mode
Fixed width, open length. The engine calculates total linear meters.
Spacing to the millimeter
Oscillating blade or hot wire: 1 mm is enough. Pack as tight as your cut allows.
Multiple densities
Create a profile per density or thickness. The engine groups parts by material.
Real meters, not estimated
See the linear meters before you start cutting. Exact cost on the quote.
PDF with your brand
Pro quote with your logo. Sign from a link.
Foam parameters
Also for
Frequently asked questions
Does it support rolls and bobbins?
Yes. Switch on roll mode and the height is unlimited. The engine calculates total length.
What spacing should I use?
For oscillating blade or hot wire, 1-2 mm is standard. Configurable per job or profile.
Does it handle multiple densities?
Yes. One profile per density or thickness with its USD/m² and spacing. Groups parts by material.
Does it generate a PDF quote?
Yes. Cost per m², waste included, PDF with your logo. Sign from mobile.
Compatible with my cutter?
Standard DXF, compatible with oscillating blades, hot wire and foam plotters.
Grab the last roll you cut by eye.
Measure how many meters you used. Upload it here. See if the engine does better. If not, you'll know how much roll goes to the bin.
Upload my first part