For garment makers, leatherworking and technical textile

Respect the pattern.
And the customer respects your deadline.

Q: Does it respect pattern direction?

Yes. Only rotates 0° and 180° to keep fabric or print. Switch off for fabric without a pattern.

Q: Does it support leather and irregular hides?

Yes. Define the usable area of the hide and it nests on it.

Q: Does it generate a PDF quote?

Yes. PDF with your logo and your terms. Sign from mobile, no account.

Q: Compatible with Gerber, Lectra, Morgan Tecnica?

Yes. Standard DXF, importable from "import nesting from file".

Q: Roll mode for long rolls?

Yes. Unlimited length. Calculates the linear meters you'll consume.

Upload the parts. The engine keeps fabric direction, runs the roll in roll mode and gets the cost per m² before cutting. With PDF quote to send the customer, if you have to quote.

Try 14 days free See how it works

No card. No demo. No training.

85-90%

Per roll, used

Roll

Unlimited length

<5 min

From DXF to PDF

14 days free, no card

No lock-in, cancel anytime

Encrypted data in the EU

Support in your language

How you do it today

·You mark parts with chalk on the table
·You lose 30 cm per roll
·Quote to the customer in two days
·Size change, you start over

How you'd do it with NestBlade

The engine nests them respecting the pattern
Real utilization at 85-90%
PDF in five minutes
Recalculate in thirty seconds

Quote and cut. Without wasting roll.

Fabric direction, sizes, tight deadlines. Sales quotes by m². The shop cuts by pattern. No meetings.

NestBlade. One price.

119USD/month

Multi-sheet nesting and DXF ready for your CNC
Real cost: material + USD/h machine time
PDF with your logo and approval by link
Approved work goes to the shop. Same data.

Try 14 days

First 10 shops: 59 USD/mo × 6 months. Code FOUNDERS.

How it works

Two minutes. The time it takes to make a coffee.

Upload the DXF

Drop the customer's drawing. Parts, holes and quantities are read for you.

See the cost

Sheets, material and machine-hour. The number you'll sign, not the one in your head.

Send the PDF

With your logo. The customer approves from a link. No account.

The shop cuts that

Same nesting. DXF into your CAM. No rebuilding the job in Lantek.

Try 14 days with a DXF sitting on your desk.

No paperwork. No "let us review your case." One email and done.

Start trial

Here's what changes Monday morning

Pattern direction

Only rotates 0° and 180° to keep fabric or print aligned. Switch off for plain fabric.

Roll mode

Fixed width, unlimited length. Linear meters calculated instantly.

Compatible with Gerber, Lectra and others

Standard DXF for the textile cutters in the sector.

Real cost per m²

Meters consumed, utilization and cost with your USD/m². Before sending.

PDF with your brand

One-click approval from the customer's mobile.

Textile parameters

1500×1000

Standard roll width

0/180°

Rotation with pattern

1 mm

Blade spacing

USD/m² + USD/h

Real cost

Also for

Custom garment makingLeatherworking and leatherAutomotive and marine upholsteryIndustrial technical textileCurtains and decoration

Frequently asked questions

Does it respect pattern direction?

Yes. Only rotates 0° and 180° to keep fabric or print. Switch off for fabric without a pattern.

Does it support leather and irregular hides?

Yes. Define the usable area of the hide and it nests on it.

Does it generate a PDF quote?

Yes. PDF with your logo and your terms. Sign from mobile, no account.

Compatible with Gerber, Lectra, Morgan Tecnica?

Yes. Standard DXF, importable from "import nesting from file".

Roll mode for long rolls?

Yes. Unlimited length. Calculates the linear meters you'll consume.

Grab the pattern from the last order.

Upload it here. Look at the real meters and the PDF you'd send the customer. If it adds up, you're in. If not, you'll know how much roll stays on the floor.

Upload my first pattern