More furniture per panel.
And the quote, in five minutes.
Upload the furniture drawings. We place the parts respecting the grain, calculate the cost per panel and generate the quote in PDF. The customer approves with one click and it drops to the bench, cut ready.
No card. No demo. No training.
How you do it today
- ·You count parts on your phone calculator
- ·You cut a quarter panel "just in case"
- ·The whole afternoon in Excel for the quote
- ·The customer changes a finish and you start over
- ·The leftover gets lost on a Post-it
How you'd do it with NestBlade
- Upload the drawing and the engine counts the parts
- You hit a real 85-90%, no buffer
- PDF with your logo in five minutes
- Recalculate in thirty seconds
- The approved layout drops into the CNC queue
Quote and cut. In the same place.
Your sales closes the furniture. The shop receives the cut with panel type, quantities and deadline. No passing drawings by hand.
NestBlade. One price.
- Multi-sheet nesting and DXF ready for your CNC
- Real cost: material + USD/h machine time
- PDF with your logo and approval by link
- Approved work goes to the shop. Same data.
First 10 shops: 59 USD/mo × 6 months. Code FOUNDERS.
How it works
Two minutes. The time it takes to make a coffee.
Upload the DXF
Drop the customer's drawing. Parts, holes and quantities are read for you.
See the cost
Sheets, material and machine-hour. The number you'll sign, not the one in your head.
Send the PDF
With your logo. The customer approves from a link. No account.
The shop cuts that
Same nesting. DXF into your CAM. No rebuilding the job in Lantek.
Try 14 days with a DXF sitting on your desk.
No paperwork. No "let us review your case." One email and done.
Here's what changes Monday morning
Respects the grain
Only 0° and 180° rotation with grain on. For MDF or particleboard, switch it off and it rotates freely.
Standard and custom panels
2440×1220, 2800×2070, 3050×1220 preset. Or your exact sizes.
Real cost per panel
Material, machine-hour and waste of every job, on the dashboard. No estimating.
The quote is the nesting
The number the customer signs is the one that gets cut. No Excel on one side and CAM on the other.
Furniture quote with your brand
PDF with your logo, your colors. Like your old software, in five minutes.
Changes without pain
They want one more drawer, change finish. Recalculate and send a new link. No redoing the sheet.
Panel parameters
Also for
Frequently asked questions
Does it respect the grain?
Yes. With grain on, it only rotates 0° and 180°. Switch it off for MDF, particleboard or directionless materials.
Can I use non-standard panels?
Yes. The common sizes are preset, but you can enter any width and height.
Does it generate the furniture quote in PDF?
Yes. Apply your USD/h and margin, and it comes out with your logo. The customer approves from mobile.
How do I pass the cut to the CNC?
Download the DXF and open it in your controller. With the Production module, it drops to the shop queue automatically.
Do you respect grain?
Yes. 0/180 rotation when you mark grain. Nesting doesn't spin parts at random.
Does it support multiple panel types in one job?
Yes. The engine groups parts by material and nests each group on its panel.
Grab the furniture you quoted by eye on Monday.
Upload it. Look at the cost per panel, the PDF with your logo and the cut for the bench. If it adds up, send it. If not, you'll know where the material goes.
Upload your first drawing