Your sheet, cut better.
Your quote, before the coffee.
Upload the customer's DXF. Get the nesting at 88%, the real cost with your USD/h, and the quote in PDF with your logo. They approve with one click and it drops into the shop queue.
No card. No demo. No training.
How you do it today
- ·You guess the cut by eye in SolidWorks
- ·You call the warehouse for the price per kg
- ·Forty minutes in Excel for the quote
- ·The customer takes three days to approve by email
- ·You rebuild the nesting in Lantek
How you'd do it with NestBlade
- Upload the DXF in your browser
- The engine reads parts, holes and bends
- Cost, sheets and PDF with your logo in five minutes
- They sign from a link, no account needed
- The approved layout drops into the CNC queue
Quote and cut. In the same place.
Sales closes the quote. The shop receives the job with parts, material and deadline. No forwarding the DXF five times.
NestBlade. One price.
- Multi-sheet nesting and DXF ready for your CNC
- Real cost: material + USD/h machine time
- PDF with your logo and approval by link
- Approved work goes to the shop. Same data.
First 10 shops: 59 USD/mo × 6 months. Code FOUNDERS.
How it works
Two minutes. The time it takes to make a coffee.
Upload the DXF
Drop the customer's drawing. Parts, holes and quantities are read for you.
See the cost
Sheets, material and machine-hour. The number you'll sign, not the one in your head.
Send the PDF
With your logo. The customer approves from a link. No account.
The shop cuts that
Same nesting. DXF into your CAM. No rebuilding the job in Lantek.
Try 14 days with a DXF sitting on your desk.
No paperwork. No "let us review your case." One email and done.
Here's what changes Monday morning
Up to 30% less scrap
You use 85-90% of every sheet. The gap with your current nesting goes on the scale, not in the bin.
The kerf is already in
Compensates the cutting width for laser, plasma and oxy-fuel. No parts stuck together, no short dimensions.
Your Lantek won't notice
DXF Block/INSERT identical to what you generate today. If your CNC opens DXF, it opens ours.
The quote is the nesting
The number the customer signs is the one that gets cut. No Excel on one side and CAM on the other.
PDF with your brand
Your logo, your colors, your footer. Just like always, in five minutes.
One-click approval
Send the link by email. The customer signs without creating an account. The approved one passes to the shop with one click.
Sheet metal parameters
Also for
Frequently asked questions
Is it compatible with Lantek?
Yes. DXF Block/INSERT, identical to what Lantek imports from "Import nesting from file".
Does it support bends, countersinks and internal holes?
Yes. It detects them automatically from the DXF and preserves them in the cut.
Does it generate the PDF with my logo?
Yes. Upload your logo in Settings and every quote comes out with your brand.
How do I pass the approved job to the shop?
If you have the Production module, one click and it goes into the queue with parts, material and deadline.
Does it replace Lantek?
No. You export DXF. Lantek stays on the machine. NestBlade takes Excel out of the office.
Multi-sheet for big runs?
No limit. Upload hundreds of parts and the engine spreads them across N sheets, minimizing the total.
Grab the DXF from the last job you quoted by eye.
Upload it. Look at the utilization, the real cost and the PDF you'd send the customer. If it adds up, you're in. If not, you'll know how much you're leaving on the shop floor.
Upload your first DXF